Weatherables YWPG-ROYAL Guide d'installation télécharger pdf (Page 5)

Lay out, center and dig all four post holes 12”

diameter x 36” deep. Posts can be no more

than 78” inside to inside.

*Note: For concrete mount installation skip to step 3.

78”

*Note: If not using the optional concrete mounts,

skip to step 6.

36”

Install (4) 4x4x96” wood post (not

included)and level. Set your post, fill with

concrete leaving 3” from the top of the hole.

Place wedge anchors (R) into each hole and tap

into concrete leaving 1” above the concrete. Place

concrete post mount (Q) over the installed

anchors and install washer and nut to each

anchor. Level and tighten with 9/16” socket.

Do not over tighten.

Optional Concrete Mount Step

Place, square and trace each concrete post

mount. (Q) Pre-drill concrete mount holes with

hammer drill at 4 1/2” depth with 3/8”

masonary bit.

Do not rush.

Optional Concrete Mount Step

1 2 3 4 5 6 7 8

Pas de commentaire

Weatherables YWPG-ROYAL Guide d'installation Page 5